Single color screens
Green and amber phosphors were used on most monochrome displays in the 1970s and 1980s. White was uncommon because it was more expensive to manufacture, although Apple used it on the Lisa and early Macintoshes.
Modern technology
Analog monitors
Most modern computer displays can show the various colors of the RGB color space by changing red, green, and blue analog video signals in continuously variable intensities. These are almost exclusively progressive scan. Although televisions used an interlaced picture, this was too flickery for computer use. In the late 1980s and early 1990s, some VGA-compatible video cards in PCs used interlacing to achieve higher resolution, but the event of SVGA quickly put an end to them. While many early plasma and liquid crystal displays have exclusively analog connections, all signals in such monitors pass through a completely digital section prior to display.
While many similar connectors (13W3, BNC, etc.) were used on other platforms, the IBM PC and compatible systems standardized on the VGA connector in 1987.
CRTs remained the standard for computer monitors through the 1990s. The first standalone LCD displays appeared in the early 2000s and over the next few years, they gradually displaced CRTs for most applications. First-generation LCD monitors were only produced in 4:3 aspect ratios, but current models are generally 16:9. The older 4:3 monitors have been largely relegated to point-of-service and some other applications where widescreen is not required.
Digital and analog combination
The first popular external digital monitor connectors, such as DVI-I and the various breakout connectors based on it, included both analog signals compatible with VGA and digital signals compatible with new flat-screen displays in the same connector. Older 4:3 LCD monitors had only VGA inputs, but the newer 16:9 models have added DVI.
Please Visit to MyCheapWidescreenMonitorsShop
No comments:
Post a Comment